Aerospace Tooling Capabilities

The Raptor facility is approximately 20,000 square feet. This space allows us to tackle virtually any project from the smallest to very large projects while maintaining advantages of a small business, like excellent customer service and a commitment to quality from the top down. Benefit from our more than 25 years experience designing and building tooling.

We have the most advanced equipment available to the Raptor team – a laser tracker, two 5 axis machines and a full weld and fabrication department including:

Tooling Machines

Fidia D321

Machining envelope

  • X 124.0″
  • Y 92.5″
  • Z 43.3″

Linear axis speed

  • 24 m/min (944.8 ipm)
  • A axis travel +95º ÷ -110º
  • C axis travel ± 360º
  • A, C max continuous speed 3600 º/min
  • Max spindle speed 24,000 RPM
  • Max spindle power 75HP
  • Toolholder HSK63A

Table weight capacity 100,000 lbs

Fidia K414

Machining envelope

  • X 165″
  • Y 90″
  • Z 60″

Linear axis speed

  • 24 m/min (944.8 ipm)
  • A axis travel +95º ÷ -110º
  • C axis travel ± 220º
  • A, C max continuous speed 3600 º/min
  • Max spindle speed 24000 RPM
  • Max spindle power 30HP
  • Toolholder HSK63A

Table weight capacity 100,000 lbs

 

Okuma MU6300V-L

  • X 36.42″
  • Y 41.34″
  • Z 23.62″

Linear axis speed 1,968ipm

  • A axis travel +90° to -120°
  • A axis travel +-360°
  • Max spindle speed 12,000 RPM
  • Max spindle power 35HP
  • Toolholder HSK100

Fryer 5X-120

  • 1 ea. 5 axis machine – spindle speed 18,000 RPM
  • X travel 120”, Y travel 50”, Z travel 39”
  • B travel +/- 120 degrees
  • C travel +/- 220 degrees

Feeler VB-2200

  • 2 ea. 3 axis machines – spindle speed 6,000 RPM
  • X travel 86.6”, Y travel 37.8”, Z travel 31.5”

Feeler HV-1000

  • 3 axis machine – spindle speed 15,000 RPM
  • X travel 39.4”, Y travel 20.5”, Z travel 19.9”

Conventional Machining Equipment List

  • 1 ea. Devlieg Jig Mill X travel 96”, Y travel 72”, Z travel 40”
  • 1 ea. Bridgeport Series II knee mill with Led readout
  • 1 ea. Bridgeport Series I knee mill, with LED readout
  • 1 ea. Ultima knee mill with LED readout
  • 1 ea. Roskelly 1440 lathe
  • 1 ea. Standard Modern Tech. 16/60 lathe
  • 1 ea. Harig Super 612 surface grinder
  • 1 ea. Harig 618 surface grinder
  • 1 ea. Knuth HB320 lay down saw
  • 1 ea. Carolina HV20 lay down saw
  • 1 ea. DoAll C-4 lay down saw
  • 1 ea. Knuth VB 610 vertical band saw

Inspection Equipment and Software

  • Faro Prime 8ft. articulating arm with Verisurf X6 software
  • Leica Laser Tracker AT930
  • 1 ea. 4’ x 8’ certified surface table
  • 1 ea. 4’ x 10’ certified surface table
  • 1 ea. 5’ x 10’ certified surface table.
  • 2 seats of Catia V5 Rel. 22
  • 3 seats of MasterCam X6

Forklifts

  • Daewoo C25S rated at 6,000 lbs.
  • Hyster S50XL rated at 5,000 lbs.

Weld Equipment

  • 1 ea. Millermatic MIG
  • 1 ea. Miller Syncrowave 250 TIG
  • 2 ea. Miller Dynasty 350 MIG
CONTACT US

Get a Quote